Construction DB | Construction Site Handbook | Rolling Edge Test

Construction Site Handbook

Share your expertise and experience with the Construction DB community. You are free to add or edit any of the articles in the Construction Knowledge Collaboration Project.

[English | 简体] Rolling Edge Test

This is a test conducted on site to determine the surface profile and the cross fall of the as-cast concrete pavement and is conducted by the laboratory staff . Normally the acceptance of surface profile is to be determined by the survey results and the respective sections . However in case there are some local areas that are found beyond the design profile and out of tolerance , the Rolling Edge Test will be deployed to further investigate . The test apparatus includes a long beam which to be placed transversely across the test area with determined level . A series of measurements are taken between the underside of beam and pavement surface to indicate the sectional profile and the series of sectional profiles will indicate the longitudinal profile accordingly .

Rolling Edge Test Sub-Pages