You are here
Dye Test
This test is used to find out the apparent path of water leakage at the tidal zone or from high level to low level . Place the dyed water in the water inlet and record the location and time of test . The site supervisor should inspect the surrounding area , may be quite remote from the water inlet , to watch out where will be the dyed water coming out and respectively record the location and time of finding .
Disclaimer; This wiki article is contributed by our members without formal peer review and should not be taken as legal or contractual advice. All information read here is without any implied warranty of fitness for any purpose or use whatsoever. Even articles that have been vetted by informal review may later have been edited inappropriately, just before you view them.